ALGUIEN HA UTILIZADO LAS PISTOLAS LASER EN BÚSQUEDAS?

Laserscan





with Infrared Laser Guided Technology

Laser
guided infrared scanners work by recognizing that all objects
having temperature radiate infrared energy. This
energy travels in all directions at the speed of light. Objects
store and dissipate this energy in different concentrations.
For example: If a treasure were hidden in a cave on the side
of a mountain and the mouth of the cave was filled in, the
treasure would be hidden from sight. However, when
a infrared scanner is pointed at the side of the mountain,
it can read the typical surface temperature. The
trapped air in the cave keeps the mouth, even though covered
over, slightly cooler and this difference can be detectable.
Buried treasure (gold and silver) will absorb and store more
heat than the ground surrounding it. As the ground cools,
the treasure retains a higher degree of heat which
is indicated on the infrared scanner.

Use laser guided infrared scanners to locate physical treasures,
caves, tunnels, mines, wells, etc. When an infrared scanner
is used at a treasure site at ground level, or scans the side
of a hill, the guided infrared scanner lens collects and focuses
the energy onto an infrared detector. Then the information
is sampled by an on-board computer and instantly displayed
on an LCD screen showing the temperature of the target area.
By taking different readings of an area, the scanner will
be able to determine temperature changes caused by buried
metals, caves, mine shafts, etc. Many treasure hunters have
reported that infrared scanners have been instrumental
in helping to locate many treasure sites. Sometimes
the ground is covered by heavy vegetation and it is almost
impossible to take in larger metal detectors. In many cases
the infrared scanners would locate the hot spot or disturbed
area, making it easier to locate the treasure.


From
KELLYCO Metal Detector Superstore:
A rock solid LIFETIME program of back-up and support.
For as long as you own your detector you are entitled to contact
us (by phone, fax, or e-mail) to answer questions, and assist
you with any problems or concerns.

HOW TO WORK THE LASER SCANNER IN 5 EASY STEPS
	Aim the scanner at target. Pull and hold the trigger while pointing at the target area (for more distant areas, hold the scanner at arm's length and use the sighting groove for aiming) Note the temperature information on the liquid crystal display (LCD) Take readings of the target area to establish an "average" temperature Continue to scan target area until you notice a difference either "higher' or "lower" than the established "average" temperature
The further from the target the larger the scanning area.

The DIS
400 and DIS 600 Pro feature what we call "MX" Laser
sighting and features a unique 16 point laser sighting
circle with a center aiming point for treasure.
Now for the first time using "MX" technology and
coupled with an improved optics called D:S 60;1, you can now
get temperature measurements from any distance!

DIS
600 Pro

The
DIS 600 Pro is the high-performance model
that has an on-board emissive table. (This will help you compensate
for soils). Other features are built-in audible/visible low
alarm, 100 points of data logging and with the optional windows
based data graphing software you can load your readings into
your computer.

Features • Adjustable Emissive • On
Board Emissive Table • 16 Point Laser Circle Spot: meets
IEC Class 2 & FDA Class II requirements • Audible/Visible
High Alarm • Audible/Visible Low Alarm • MAX
and MIN Temperature - DIF and AVG Temperature • Bar
Graph Display • Data output: RS232 or 1mV
per Degree (C or F) -100 Points of Data Logging.

LIST
$2095.00
ONLY $1349.95


DIS
400 Pro

The is the standard model, just point and
aim at your target site and take your reading at up to almost
any distance:

•
MX technology using 16 lasers
• Improved optics read from any distance.
• Re-designed handle

Features • Adjustable Emissive
• 16 Point Laser Circle Spot: Meets IEC Class 2 and
FDA Class II Requirements • Audible/Visible High Alarm
• MAX/MIN Temperature • Bar Graph Display


LIST
PRICE $1495

ONLY $899.95


Low
cost, DIS-150 laser guided scanner. Pinpoints targets with
laser. Portable, Simple, Safe to use. Can be used
by anyone. Rugged optics are environmentally sealed. Get measurements
even in the harshest conditions. Features
• last reading recall • MaxScan with audible signal
• high audible and visual signal.
LIST
PRICE $ 695.00
SALE PRICED AT $599.95

Saludos compañero DEThector, lo hemos utilizado en algunas ocasiones, sobre todo en fincas con paredes de adobe, como hacienda, para localizar algún objeto metálico en los tabiques, aunque es mas práctico usar los detectores, también frecuentemente utilizamos un marcador láser para distancias.

Yo tengo una cosa de esas y no funciona para buscar tesoros.

Que tal, también tengo un modelo Raytec, pero hay que fijarse en lo que llaman "spot ratio" muchos vienen en 12:1 , 20:1 , 50:1 , etc.
y principalmente usarse en epocas de calor, ya que cuando la gente dice que "arde" es logico usarse y cientificamnente un tesoro superficial eleva la temperatura circundante o la mantiene durante la noche, y el termometro infrarrojo es mejor que sea mas sencible de 50:1, o mayor.
no hay que baserse en ellos son una guia para confirmar un blanco y hay que tomar las circunstancias y condiciones del terreno.

Alguien que haya comparado el Bionic vs centurion 21 les agradeceria que me lo dijeran.


saludos.

si tienen una pistola lasser que se le cambie la emisividad, (que lo normal es 0.95) sería bueno bajarla a 0.35 o hasta 0.10 da muy buenos resultados en ver las variaciones de temperatura, es super sensible,,, al usarse al atardecer o en la mañana antes de que salga el sol, y se pueden tomar lecturas de 30 pies a 100.